|
Post by dglongboards on Mar 28, 2009 12:50:47 GMT -5
i have the 15 foot muttineer and i did some repair work to get her back in the water this season. i took the rivets out of the metal trim and repaired the problems but im having trouble coming up with an inexpensive way to secude the hatch back on the boat...i cannot half donkey it because i know if would rip right off... can someone offer a good fix idea..thank you
|
|
|
Post by cjones on Mar 17, 2010 9:16:41 GMT -5
I have a Mutt and assume you mean the rivets on the center board cover in the trim piece. No hatch on a Mutt. Just put it back on and add some more rivits to it or screw it back on using pan head screws in pre drilled holes and use twice as many rivits or screws. Good luck
|
|